100L Australian standard flammable safety cabinet

100L Australian standard flammable safety cabinet

FEATURES:

Class 3- flammable liquids(AS1940-2017）
1. 1.2mm CRS 2. Walls, floor, door and roof to be of double-walled sheet steel construction. 3. There must be a gap of at least 40mm between the walls to limit heat getting inside the cabinet. 4. The cabinet bottom must form a liquid-tight compound at least 150mm deep to contain spills. The design must prevent the compound from being used as a storage area. 5. Shelves must be perforated for free air movement, and be capable of supporting the maximum possible load. 6. Doors must be self-closing, close-fitting and held shut automatically by catches at two or more points. 7. Critical components must not melt at temperatures less than 850 degrees C. 8. Any provision for venting must not compromise the integrity of the cabinet. 9. Each cabinet must be marked with the name and address of the manufacturer , its maximum capacity, a 250mm Class 3 dangerous goods label, and a “NO SMOKING, NO IGNITION SOURCES WITHIN 3m” sign.
Dimension: